LTE_切换信令流程.doc

Handover 1 Intra-E-UTRAN handover 1.1 X2-based handover 1.1.1 General These procedures are used to hand over a UE from a source eNodeB to a target eNodeB using the X2 reference point. In these procedures the MME is unchanged. Two procedures are defined depending on whether the Serving GW is unchanged or is relocated. In addition to the X2 reference point between the source and target eNodeB, the procedures rely on the presence of S1-MME reference point between the MME and the source eNodeB as well as between the MME and the target eNodeB. The handover preparation and execution phases are p