刀具直径和磨料粒度对微铣磨表面粗糙度的影响.pdfVIP

东北大学学报(自然科学版) Vo l. 34 ,No. 12 第34 卷第12 期 Journal of Northeastern University (Natural Science) Dec. 2013 2013 年 12 月 刀具直径和磨料粒度对微镜磨表面粗糙度的影晌 王起，巩亚东，尹国强，程军 (东北大学机械工程与自动化学院，辽宁沈阳 110819) 摘 要:微尺度统磨复合加工是一种兼具微镜削与微磨削特点的新型加工工艺.为给微镜磨复合刀具参 数优化提供理论依据和数据参考，用立方氮化跚(CBN)微镜磨复合刀对不同材料进行微镜磨复合加工试验， 并与微镜削加工进行对比，研究刀具直径和磨粒粒度对工件表面质量的影响规律.结果表明:选择合适的刀具 参数能使微镜磨复合加工表面粗糙度达到亚微米级，且优于微镜削表面质量;在一定范围内减小磨粒粒径或 增大刀具直径能够提高微镜磨复合加工的表面质量，且磨料粒度对表面粗糙度的影响更为显著. 关键词:微镜磨;磨料粒度;刀具直径:表面粗糙度;表面形貌 中固分类号: TG 506.9 文献标志码:A 立章编号: 1∞5 - 3026(2013) 12 -1759 -04 Inf1uence of Tool Diameter and Abrasive Particle Size on Surface Roughness in Micro Mill-Grinding WANG Chα0 ， GONG Ya-dong , YIN Gω-qlαng ， CHENG Jun (School of Mechanica1 Engineering Automation , Northeastern University , Shenyang 110819 , China Corresponding authof: WANG Chao , E-mail: wangchaoneu@163.com) Abstract: Micro mill-grinding is a novel machining technology with characters of micro milling and micro grinding. To provide theoretical support and data reference for 阳ameters optimization of the micro mill-grinding tools , different materials were machined with the cubic boron nitride micro mill-grinding tools. 白le influence of the tool diameter and abrasive p缸ticle size on workpiece surface quality were analyzed and compared with those of micro milling. The results show 由at if appropriate tool 阳ameters are used in micro mill-grinding , submicron surface roughness will be obtained and it is better than that machined by micro milling. Sma11er p缸ticle size or 1鸣er tool diameter will make surface qua1ity better to some extend in micro mill-grinding , and 也e influence of particle size on surface roughness is more significant. K