柑橘包装机控制系统设计.docVIP

毕业设计 题 目 柑橘包装机控制系统设计 学 院 专 业 班 级 学 生 学 号 指导教师 二〇 年 月 日摘 要 本论文对柑橘包装机控制系统进行了设计，论文主要完成了控制部分的设计、传动部分的设计以及柑橘包装机控制系统的设计。同时本论文针对柑橘包装的结构特点，柑橘包装机的工艺进行了设计，对方案进行了设计，并对控制系统方案进行分析选择，之后对整个控制系统点了进行了设计，结合控制系统的电路结构特点以及柑橘包装机的控制要求对其做了进一步的控制设计。特点，对其进行，并且也选择串行接口对其控制方式做了进一步的分析，之后对传动的调速系统做了说明的包装整个包装机系统的工作稳定性并包控制系统本身的可靠性得到提高；PLCABSTRACT In this paper, the control system of citrus packaging machine is designed. The design of the control part, the design of the transmission part and the design of the control system of the citrus packaging machine are mainly completed. At the same time, according to the overall structural characteristics of the citrus packaging machine, the process design of the citrus packaging machine was carried out, and the control scheme was designed. The control system was analyzed and selected, and then the whole control system was designed , Combined with the control system of the circuit structure characteristics and citrus packaging machine control requirements to do a further control circuit design. Combined with the characteristics of PLC, its selection, and also through the serial interface to control its way to do a further analysis, after the transmission speed system to do a description. The process of combining citrus packaging, as well as the process of automatic packaging of citrus, is expressed in the form of a flow chart. The control part mainly selects the input and output interface according to the requirements of the system control and selects the appropriate PLC, and explains the PLC interface of the model, selects the appropriate electrical components, designs the control circuit of the packaging process, Circuit design. Transmission part of the choice of chain drive in the form of chain drive to achieve between the active shaft and the transmission