纳米晶W_Cu合金粉体的冷压成形研究_潘保武.pdfVIP

8 　 1 　　　　　　　　　　　　　　 Vol.8　No .1 　　　　　　 　　　　　　　　　　 2 0 0 0 3 　　　　　　　　　　　　MATERIAL SCIENCE TECHNOLOGY　　　　　　　　　　　　 Mar.　2000 　　:1005-0299 (2000)01-0090-03 W -Cu 潘保武, 赵捍东 (华北工学院材料工程系, 山西 太原0 30051) 　:W-Cu .600 MPa , 15%, . :;; :TF 124 .32　　　:A 　　 Cold pressing of nanocrystalline powder of W (Cu ) by mechanical alloying PAN Bao-wu, ZHAO Han-dong (Dept.O M aterial Science and Engineering, North China Institute o Technology, Taiyuan 0 30051, China) Abstract:Compares characters o nano crystalline powder o W -Cu by mould pressing (MP)or cold isostatic pressing (CIP)and concludes rom the results that the density o specimen by CIP was 15%more than that by MP in 600 MPa, but air exemption o airtight envelope in CIP had greater e ect on density and capability o pressed specimen . Key words:nanocrystalline;cold isostatic pressing;mould pressing 　　, 10 nm, . , . 、、., 5 ～ ,, 8 mm,0.01 ～1 mm, ; . (), , ( , )(50 μm), . 1 μm ., , (cold iso- ., static pressing ———CIP), 、 . . , 1 　实验方法 [1] () . : 1.1 　 W Cu W70 Cu30 :1999-09-28 , 15:1, 200 r/min, :(1964-), , , . 50 h., , 1 　　　　　　　　　　　　, :W-Cu