亚当斯动力学分析软件教程.pptVIP

General Design of Mechanical Engineering LEE, Chul-Hee Department of Mechanical Engineering INHA University Copyright © 2010, Chul-Hee LEE 1.Review of the former knowledge. 2.Interface realization. 3.Stamping machine simulation. How does a figure simulation begin, how to control the simulation. Lecture Structure 1.Open up Adams, create a new model with the model name as exercise_1. 2.Set the gravity to no gravity. 3.Units set to MKS Then build up 4.Setting the work grid with the size: 1000mm*1000mm spacing : 10mm*10mm. Change the axes color to red. 5.Change the units to MMKS 6.Add gravity in -y direction with the value -9806.65 Pause. In-class exercise : Here is a big problem in the figure, why the gravity symbol is not at the origin of the grid. Is there any change of the location of gravity. Good Question Gravity here is just a symbol, it has no meaning of the location. When you define a part in Adams, whatever it is complex, it will have the gravity at the center automatically. And also you can set the location by yourself. But there won`t be gravity symbol anymore. Here the symbol is the sum all nominal of the gravity. Interface The Interface of the Adams is like this, this is the simple vision which contains the main body and the main toolbox. If we do some thing as last week it will change to This. We can see the coordinates box, command window, Message window appear. Also if you want to change grid rapidly due to you work, you can keep it on. The first Section of main tool box is the operation section as I named. You can find every drawing and analysis buttons here. It includes tool, geometry, measure, undo, constraints, simulation, color, motion, animation, function operation, force, post-processing. Main toolbox The second section of tool box is the view control or view adjustment part. It can includes 3part too. 1.View control. 2.View angle. 3.Screen display Main toolbox Adjust your modal fit to the screen. “F” Rotating your mod