PLC的控制优势 毕业论文外文翻译 (2).docVIP

PLC control advantage Any control system from concept to enter factory work have to undergo four stages. PLC system in each stage has advantage. The first stage is designed to plant needs, study and formulate control strategy, the traditional operating platform design and manufacture must be finished before in design. PLC system just need is a vague about the size of the machine may idea and I/O number of requirements (much input and output interface). In this phase input and output chip very cheap, so can a built-in very sound reserve capacity, it allows used to supplement omission for future expansion project and prepare it. Secondly, the traditional design scheme is, every job is a once moldings the inevitable caused engineering delays and increase costs. A PLC systems use the simplest standard bolt together. In such a connection next began writing PLC program (or at least the program codes) write detailed. The next stage is to install, installation is a kind of complicated and expensive work, such as the install sensors, actuators, limit switch system and the host of connection. Distributed PLC systems use serial links type pre-compiled, testing interface can be simplified install it have come at a huge cost advantage. PLC program most in this stage finish. Finally commissioning, and this is what is the advantage of PLC real were excavated part. Without any equipment in the first would work normally. Such is human nature, theres some omissions. And the traditional system changes, compared the time-consuming and expensive PLC designer provided system built-in backup memory reserves, spare I/O and some spare much core cable, most of the changes to can be quickly and relatively cheap completed, another benefit is that all changes PLC has records, program degugging and modify wont because unrecorded lost. This is a regular system often happens in the problem. There is an additional fifth stage, maintenance, once started work, and hand over the production has p