传真机设置(国外英文资料).doc

传真机设置(国外英文资料)The fax machine is the receive mode. In the receive mode key, the TEL is the phone mode, and you have to manually give the signal. Selecting FAX is the FAX mode, which automatically signals when the bell rings. Or ANS/FAX is automatically recognized, and if the other person gives a FAX signal, it automatically identifies the corresponding FAX signal.There are four types of Fax receiving modes: Fax, Tel, FaxTel, and Answering Machine. Depending on the requirements of your work, you can choose different patterns: Fax mode: automatic receiving Fax mode. When you wish to use the machine as a normal FAX machine for some period of time, you can safely set up the FAX mode without answering any phone calls. ( FAX means FAX )Tel mode: manually receive fax mode. In some homes or small businesses, there is only one telephone line in the room, which is a phone number. At this point, you can set the machine to Tel mode. Have a call came in, all-in-one will not automatically give a facsimile signal, will ring continuously, until there is answering the phone and found each other, is to give yourself the fax again manually each other facsimile signal is given. The advantage of this model is that there is no delay in using only one phone line, and the limitation is that you have to be involved. ( Tel means phone )FaxTel mode: teleph-phone smart recognition mode. It is a form of facsimile that accepts the fax manually and automatically receives the fax. After setting this pattern, the opportunity automatically identifies the caller as a fax or voice. The comparison is applicable to busy office desk desk cases.On the Answering Machine model: when the all-in-one 2 still have Answering Machine or recording telephone connection, is set to this pattern, please leave a message in order to avoid the process was interrupted by fax tone.Method to set up and use Fax mode (automatically receive Fax mode) set up the first step: in normal standby mode, press the top left corner of th