可靠性作业1.docVIP

1． Life Data Analysis with Complete and Suspended Data Ten identical units were reliability tested at the same application and operation stress levels. Six of these units failed during the test after operating for the following times, : 16, 34, 53, 75, 93 and 120. Four other units were still operating, i.e. right censored or suspended, after 120 hr. Determine the parameters of the Weibull pdf that represents this data set and create the Probability and pdf plots. 2．Obtain the Unreliability for a Given Operating Time What is the unreliability of the units in Example 1 for a mission duration of 227 hr, starting the mission at T = 0? 3．Calculate Conditional Reliability and Warranty Time Using the analysis from practice 1, what is the reliability for a mission duration of t = 30 hr, starting the mission at T = 30 hr? Also, what is the warranty time for a reliability of 85%? 4． 3-Parameter Weibull Analysis The 3-parameter Weibull analysis option calculates the correct and adjusts the points by this value, such that they fall on a straight line, and then plots both the adjusted and the unadjusted points. Ten identical units, N = 10, were reliability tested at the same application and operation stress levels. Six of these units failed during the test after operating for the following times, : 46, 64, 83, 105, 123 and 150. The four other units were suspended after operating for 150 hr. Using the 3-parameter Weibull distribution and Rank Regression on X (RRX), find the parameters of the Weibull pdf that represents these data points. 5．2-Parameter Exponential Analysis and Plots Twenty units, N = 20, were reliability tested with the following times-to-failure: seven units failed at 100 hr, five units failed at 200 hr, three units failed at 300 hr, two units failed at 400 hr, one unit failed at 500 hr and two units failed at 600 hr. Do the following: ? Enter the data. Use the 2-parameter exponential distribution and Rank Regression on X as the parameter estimation method. ? Obt