可调节产品族的自底向上优化再设计方法.pdfVIP

VoL21. No.8 计算机辅助设计句罔形学学报 第 21 卷第8 期 2009 年 8 月 JOURNAL OF COMPUTER-AIDED DESIGN . COMPUTER GRAPHICS Aug. • 2009 可调节产品族的自底向上优化再设计方法 李中凯1.2) 谭建荣1) 冯般雄u. 1(浙江大学 CAD . CG 网欲盖在点实验写在 杭州 310027) 盯〈中同矿业大学机电工程学院 徐州 221116) (Lizk_0202@163. com) 摘 要 在建立可调节产品族优化模型的基础七，基于独立优化、平台规划、实例产品设计和方案评价的产品族自 底向上设计流程，提出基于敏感度分伤和模糊聚类的产品族优化得设计方法.在产品平台规划阶段，酋先使用变量 敏感度分析初步划分可能的平台常璧初可调节变锺集合;然后对实例产品问由于变量通用所造成的性能、成本和约 束满足变化进行模糊 C 均值袋类，并引人模糊覆盖段指数决定最优的聚类数目，合到规划多平台常量的共享.通过建 立平台非通用性指数以定最评价产品族方案的通用程度.最后采用通用电机产品族的得设计实例，证明了该方法的 正确性与高效性. 关键词 可调节产品族;敏感度分析;模糊 C 均值聚类算法g 自底向上g 优化再设计 中回法分类等 TH122 A Bottom酬Up Optimized Redesign for Scale-Based Product Family Li ZhongkaPZ) Tan Jíanrong 1) Feng Yixiong1l 儒 1) (State Key Laboratory 01 CAD . CG , Zhejiang Uniψersity ， Hangzhou 310027) 2) (School o[ Mechαtronic Engíneering , Chína Uníversíty 01 品1ining and Technology , Xuzhou 221116) Abstract Based on the optimization mode! for sca!e-based product fami!y , an optimized redesign method using sensitivity analysis and fuzzy clustering analysis is proposed. The method carries out independent optimizatíon. platform planning , instance design and scheme evaluatíon in a bouom-up approach. Sensitivity analysís is performed to help select the candidate platform common variables and scaling variables. Then , in order to achieve the reasonable platform sharing strategy , the change of performance , cost and constraint satisfaction among instance products caused by the sharing of design variables are clustered using fuzzy C means algorithm , with taking fuzzy percentage index to determine the best cluster number. The commonality of the product family scheme is evaluated quantitatively with non-commonality i