基于ANSYS参数化语言APDL对折流板的分析与优化.pdfVIP

东华大学学报(自然科学版) 第 38 卷第 5 期 VoL 38 , No.5 2012 年 10 月 JOURNAL OF DONGHUA CNIVERSITYCNATURAL SCIENCE Oct. 2012 文章编号: 1671-0444(2012)05-0546-06 基于 ANSYS 参数化语言 APDL 对折流板的分析与优化 李平1 ，蒋丹2 (1.宁夏大学化学化工学院，宁夏银川1750021; 2. 上海交通大学机械与动力工程学院，上海 200240) 摘要:利用 ANSYS 参数化编程语言 APDL，针对高压力口热器蒸冷段壳侧流体设直不同切割尺寸的 单弓形折流板和不同切割形式的多弓形折流板建立了参数化分析程序，实现了二维多孔介质模型 的参数化建模、加载、求解的模拟分析过程.通过改变程序中个别模型参数从而改变零件的尺寸和 结构，经过对多种流场的模拟分析，得出了折流板切割尺寸与切割形式对流场的影响规律.该方法 对于换热设备中折流板的优化设计是有效可行的. 关键词:折流板;APDL;优化;换热设备 中图分类号:TP 399 文献标志码:A Analysis and Optimization of Baffles Based on ANSYS Parameter Design Language APDL LI Ping 1 , JIANG Dan z (1. School of Chemistry and Chemical Engineering , Ningxia University. Yinchuan Ningxia 75002 1, China; 2. School of Mechanical Engineering. Shanghai Jiaotong University. Shanghai 200240. China) Abstracl: With ANSYS parameter design language (APDL) , the fluid in the DSZ (desuperheating zone) of high-pressure heater with baffles of different cut dimensions and types was símplified as 2 - D porous media model and simulated. which can achieve the simulation processes such as parameterized modeling , loading , and solving etc. The dimension and structure of the parts was changed by ffiodifying several model parameters in the program. The laws were found that cut dimensions and cut posítions of baffles produced an affect on the flow field after all kinds of simulations analysis were finished. The parameterized analysis method was very effectíve to optimize and design baffles of the heat-exchange eqUlpmen t. Key words: baffles; AP