SPE-167097-MS压裂液及温度对裂缝复杂指数的影响.pdf

SPE 167097 Influence of Fracturing Fluid and Reservoir Temperature on Production for Complex Hydraulic Fracture Network in Shale Gas Reservoir Charles-Edouard Cohen, Xiaowei Weng, Olga Kresse, Schlumberger Copyright 2013, Society of Petroleum Engineers This paper was prepared for presentation at the SPE Unconventional Resources Conference and Exhibition-Asia Pacific held in Brisbane, Australia, 11–13 November 2013. This paper was selected for presentation by an SPE program committee following review of information contained in an abstract submitted by the author(s). Contents of the paper have not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The material does not necessarily reflect any position of the Society of Petroleum Engineers, its officers, or members. Electronic reproduction, distribution, or storage of any part of this paper without the written consent of the Society of Petroleum Engineers is prohibited. Permission to reproduce in print is restricted to an abstract of not more than 300 words; illustrations may not be copied. The abstract must contain conspicuous acknowledgment of SPE copyright. Abstract Production from shale reservoirs depends greatly on the efficiency of hydraulic fracturing treatments. Cumulative experience in the industry has led to several best practices in treatment design, which have improved productivity of these reservoirs. Nevertheless, shale reservoirs still bring challenges to stimulation engineers, due to the complex physics involving interactions with natural fractures, stress shadow effects and proppant transport in complex fracture network. One of the challenges regards fluid and proppant selection, in particular, the issue is how to achieve the desired fracturing fluid viscosity inside the fracture for optimum proppant placement into an expanding c