翻译-冲压载荷对椭圆深冲汽车零部件产品的影响.doc

附录 Effects of punch load for elliptical deep drawing product of automotive parts Dong Hwan Park Prasad K. D. V. Yarlagadda Abstract： Deep drawing process, one of sheet metal forming methods, is very useful in industrial field because of its efficiency. The production of optimal products using this process is dependent on the process variables such as blank shapes, profile radii of punch and die, and formability of materials. Of the variables, the blank shape is very important since it controls the formability factor. This paper reports the investigations on three kinds of blank shapes and the scribed circle test on three deformation modes. The punch load distribution for elliptical forming processes were measured under different conditions of profile radii of punch and die and discussed here. These experiments clarified the influence of the profile radii of the punch and die and the blank shape on the punch-load distribution for the elliptical deep drawing product of automobile parts. The aim of this study is to investigate the effect that the process variables have on drawability in a non-axisymmetric elliptical deep-drawing process and to obtain useful data from the industrial field. Keywords： Deep-drawing proccss.Blank shape.Punch load .Profile radii .Punch stroke .Process variables. 1. Introduction The sheet-metal forming processes have an important role in industries such as automobile, airplane, and electric appliance due to their advantages in reducing development time and final cost of the products. In general, sheet-metal forming may involve stretching, drawing, repetition of bending and unbending or various combinations of these basic modes of deformation. Many studies on the process variables of cylindrical products have been carried outregarding the fundamentals of deep drawing process. Thus, many shapes such as rectangular, elliptical and non-axisymmetrical have been produced. In general, most of the research for deep-drawing process has addresse