超声波主动频率跟踪(国外英语资料).doc

超声波自动频率跟踪(国外英语资料) A hybrid bridge automatic frequency tracking circuit is its advantages, on compensation and frequency is independent of the reactance component, so as to ensure the feedback voltage in a wide frequency band is only related with the mechanical oscillation current tracking, reliable and less offset. (2) the load pressure feedback system mode. The principle block diagram is shown in figure 1.28. High efficiency, typical welding speed of no more than 0.5 seconds. The ultrasonic generator is the self-excited oscillation, power amplifier, output transformer and transducer are integrated to form a closed loop, feedback loop in the condition of satisfying the amplitude and the phase, composed of a power amplifier oscillator. 2006.7.18 17:33 Author: szcgq | preservation comments: 0 ultrasonic welding principle: ultrasonic welding is the default column of the high frequency vibration energy in the metal parts to be welded on the surface of weld metal. Low power consumption ultrasonic welding energy required to 1/3 tool life of ultrasonic resistance welding is of high quality tool steel processing, excellent wear resistance, easy installation, high precision of welding. The coefficient n represents the ratio of turns in the two part of the primary winding of the differential variable, equal to the ratio of the impedance of the compensating element to the transducers electrical arm. The Z3 is used to compensate the reactance of the bridge. Each welding tool head has two or more faces. This equilibrium condition can also be shown as Z2 / Ze=W2 / W1 X2/Xe=R2/Re=W2/W1=n, that is to say, Re/Xe is the real part and imaginary part of Ze and Z2 respectively. According to the characteristics of ultrasonic generator, this paper mainly discusses, analyzes and designs the related issues of ultrasonic generator, such as resonance, power amplifier and matching. Generally, the ultrasonic energy is added to the transducer by coupling the output transformer. The specific des