保护电脑配件(国外英语资料).doc

保护电脑配件 Protect computer parts Hard disk Computers that dont shock the conveyor belt cant simply transport them somewhere. Watch out for some of the big vibrations. Because the hard disk is a complex device, installed inside the computer, the tolerance is limited. A large vibration causes the head assembly to hit the disk, causing the disk to read and write on the surface of the disk, which can damage the disk surface and potentially destroy data on your hard disk! ) and, more severely, can damage the read-write head and permanently render the drive unusable. So, we must take the safety area to read and write head is arranged on the disk, and then to move; in the moving process must light; if you intend to transport it to the car, it is better to put it in position behind the carriage; if by mail, please put it nicely wrapped up. A main board Electrostatic and electrostatic deformation may most avoid corrosion on the motherboard BIOS chip and data interface, damage to various gate circuit based on MOS transistor, which is bad, all of the user (inserted in it card or device) to each other can not find, because they are linked by the general line and control chip group, to coordinate and implement the control circuit. So, try to use soft, anti-static articles wrapped on the motherboard, pay attention to touch it with hand, you should first touch the conductor, so that the hand static electricity release, and then gently handle. In addition, the deformation of the motherboard may make the circuit board fault components on the motherboard, taking off, but are a broken line, you simply can not find. So try not to let the other carrying the main items on the board above, it is best to put in the box to carry on the motherboard; install the motherboard, we must carefully be smoothly installed on the chassis, not side higher; in the video card, sound card or other card inserted, attention must be moderate pressure, the balance of force. Memory Most bogey overclocking, becau