塔式起重机司机培训考试11111(国外英语资料).doc

塔式起重机司机培训考试11111 Special operations personnel training questions Crane operation - Driver 2 Pocke (pocke) there are 1. pulley flange crack or damage may not continue to use. Standard answer: B. (pocke) 2. lifting operation is prohibited when the crooked cable-stayed suspended. Standard answer: B. (pocke) 3. of the thickness of drum wear reaches 50% of the original thickness should be scrapped. Standard answer: X (pocke) 4. hook without anti tripping device shall not be used. Standard answer: B. (pocke) inspection and test of the safety device should be 5. crane. Standard answer: B. (pocke) 6. when the wire rope diameter relative to the nominal diameter (%) should be scrapped. A. 3 B. 5 C. 7 D. 10 Standard answer: C (pocke) 7. wire section size is small, the resistance (). The bigger the A., the smaller the B. C. does not change, D. first becomes big, then becomes smaller Standard answer: A (pocke) 8. brake pad wear of the original thickness (%) should be scrapped. A. 40 B. 50 C. 60 D. 70 Standard answer: B (pocke) 9. crane rated lifting weight includes special container spreader, electromagnet spreader, vacuum cups, etc.) can be divided into (the weight of the spreader. A. grab B. hook C. hook group D. hang rope Standard answer: A (pocke) 10. (and above) crane in the wind and rain, snow, fog and other inclement weather prohibited operations. A. 3 B. 4 C. 5 D. 6 Standard answer: D A judge, judge the following questions (right or wrong, and in the right questions behind the brackets tick error problem behind the brackets *. The big question is 40 minutes, every day 1 points, a total of 40 points) 11. safety production law stipulates that the principle of safety production is: safety first, prevention first. Standard answer: B. 12. the regulations on safety in production in Sichuan stipulates that the principle of safety production is: safety first, prevention first, comprehensive management. Standard answer: B. 13. Sichuan province safety regulations in the framework