学习单片机开发设计的八大关键步骤(国外英语资料).doc

学习单片机开发设计的八大关键步骤 7F, 0x6f, 0xa6,0xdb, 0xcf, 0x, e6,0xed, 0xff}; / / unsigned char digital tube Dan A[6]={0x76,0x79,0x38,0x38,0x3f, 0x80}; //HELLO char code unsigned code SPI sbit adcs=P3^4 * / / * definition bus; quasi SPI bus, / / mouth line mode B[6]={0x00,0x20,0x40,0x60,0x80,0xa0}; Sbit csda=P3^5; //sbit is Receive and display void / / //AD voltage AD_display (void); A variable, SPI bus sbit clk=P3^6 AD and DA sbit definition; addo=P3^7; sbit din=P1^4; sbit addi=P1^4; sbit a_138=P1^5; 3-8 a B, C decoder, sbit b_138=P1^6; sbit c_138=P1^7; / / define /*AD started a short delay / void (unsigned delay char x unsigned char data) {for (I; i=0; ix; i++);} /*1ms delay subroutine. / * * / void delay function declaration (unsigned char x); Void DEL (unsigned int count) {unsigned char data t; / / about while (count--! =0) {keyscan} (void); int readad (void);} /*AD / readda (void) promoter; adclk (void) {adclk (void); clk=1; delay; (2) ledscan (void) clk=0; delay; command; (2) (void);} /*AD / led_bell conversion (void); unsigned int readad (void) {Serial_inis (void); unsigned char adcs=0; data I; serial (void); (adclk); addi=1; read_serial; adclk (void) (for (t=0);; t72; t++); //AD (unsigned DEL void launched a short delay int count); 1ms delay subroutine void / / unsigned keyboard scanning //AD void //DA void //AD conversion conversion clock void //LED void / void //LED scan command processing and buzzer testing void / / void / / void serial port serial port initialization Addi=1; adclk; addi=1; adclk (()); (for; addo==1; adclk) {(for)}; (i=0; i8; i++; ch=) {(adclk)} |addo (ch1); adcs=1; return (CH);} /*AD / void AD_display display (void) {unsigned char L l=0;; while (l255) {unsigned int data k_1 unsigned int data j_1; pressure; lights display unsigned int data code t_1; after two unsigned int data number m_1 number unsigned int data; n_1; after a decimal point unsigned int data p_1; / / / / / / the number of ring on the whole small / / / / the number of electric / / P_1=0;