机械加工复习题(国外英语资料).doc

机械加工复习题 1. The concept of economic precision is the precision that can be achieved by workers in general processing conditions and general technical level. 2. In the process of machining, the system consists of machine tools, clamps, tools and workpieces, Referred to as the machining process system, referred to as the process system. 3, the phenomenon of surface hardening after machining is called work hardening, also known as cold hardening. Plan and schedule production, 4 production enterprises in the planning period is called production just collar, according to the production program, usually can be divided into single production type enterprise production, mass production and mass production. 5. The machined object in the machining process is called the workpiece. 6, from the surface of the workpiece when machining, cutting a metal layer, called the machining allowance. Known from the surface of the workpiece cut off a layer of metal thickness for the process of machining allowance in one procedure. 7. The reference coordinate system used to define the geometric parameters of a tool is called the tool geometry angle reference coordinate system. The most commonly used tool is the stationary reference coordinate system. 8 machining accuracy includes: dimensional accuracy, shape and position accuracy, surface accuracy three aspects. 9, process specification refers to the specific production conditions, will be more reasonable process determined to fill in the form, and the mandatory implementation of the process documents. 10. The main factors that affect the cutting performance of parts are workpiece material, tool geometric parameters, tool weight, material cooling, lubrication conditions and tool wear. Three 1, a sharp edged tool in the main cutting edge is two edged cutting edges. 2. In the process of machining, the system consists of machine tools, clamps, tools and workpieces, Referred to as the machining process system, referred to as the process system. 3.