给、排水工程安装常识(国外英语资料).docVIP

给、排水工程安装常识 Give common sense to water supply and drainage engineering Release time: 2012-08-03 15:21:12 I. water supply system 1 indoor water supply system The task of the water supply system is to deliver the water of the municipal water supply network or the water supply to the water supply points in the room to meet the users requirements for water quality, water quantity and water pressure. The water supply system can be divided into living water supply system, production water supply system and fire water supply system according to its use. Each water supply system can be set alone or a reasonable common system can be used. (1) the composition of indoor water supply system The indoor water supply system consists of inlet pipe (inlet pipe), water meter node, pipe system (dry pipe, standpipe pipe, branch pipe), water supply accessory (valve, water meter and water tap). When the water pressure of the outdoor pipe network is insufficient, a pressurized water storage equipment (water pump, water tank, storage tank, air pressure water supply device, etc.) is also needed. (2) water supply mode and characteristics; 1) direct water supply mode The direct water supply mode is that the indoor water supply network is connected with the external water supply network directly, and the water supply is supplied by the external network. Applicable to the external network water pressure, water quantity can often meet the water requirements, indoor water supply without special requirements of single and multi-storey buildings. The characteristics of this water supply system are reliable water supply, simple system, low investment, simple installation and maintenance. It can make full use of external network hydraulic pressure and save energy. But there is no water storage equipment inside, and the water supply will be cut off immediately when the water supply outside the network is closed. When the outdoor water supply network water quality, water quantity and water pressure can