给排水常用资料(国外英语资料).docVIP

给排水常用资料 1. Water pressure required by water supply: Water inlet: One layer, 10m; two layers, 12m; three layers and more layers; 4 (n+1) and N as number of layers. Water supply: Residential water meters before the water pressure should generally be 0.10 ~ 0.15 MPa; Residential feed water pressure greater than 0.35MPa should be reduced pressure; Hydrostatic pressure shall not be greater than 0.45 MPa in water supply section; The maximum pressure of water supply fittings for sanitary appliances shall not be greater than 0.60 MPa. Firefighting: Hydrant mouth (7m, 10m, 13m enrichment water column), bolt mouth pressure 15m, 20m, 25m; (Note: press the plug mouth SN65, water gun is D19, linen hose 25m, lining adhesive tape, bolt pressure can also be subtracted 2m); Hydrant mouth is larger than 0.35MPa, should be reduced (mainly consider throttling); The hydrant mouth is larger than 0.5MPa and should be decompressed; The static pressure at hydrant shall not be greater than 1.0MPa; The working pressure of spray distribution pipe should not be greater than 1.2MPa; The spray nozzle height should alarm valve using 50m; The spray pipe entrance pressure should be more than 0.40MPa. Pump head estimation: Life pump head is: H = 4 (n+1), n is the number of layers, units: meters; Indoor fire hydrant water pump: H+11 (meter); Spray water pump: H+22 (meter). 2. Water supply equivalent of common sanitary apparatus: Self closing flushing valve 6, Bath tub, mop basin, sink, washing machine, 1, Shower, wash basin, wash basin, 0.75, Flushing tank, urinal, urinal automatic flushing valve, 0.5 The rated discharge rate of sanitary ware is equivalent to 5 3. Drainage equivalent of common sanitary appliances: Self closing flushing valve 3.6, Medical urinal, flushing tank, closet 4.5, Bath tub 3, Washing machine 1.5, Mop, sink, sink (water tap) 1, Wash basin 0.75, Shower 0.45, Wash basin and urinal automatic flushing valve, 0.3 The discharge rate of sanitary ware is equivalent to 3 4, hot water tr