淠望路斜拉桥塔梁同步施工关键技术.pdfVIP

摘 要 淠望路斜拉桥由于施工工期限制，采用了塔梁同步施工方法。本文结合淠望路 斜拉桥工程具体情况，对其塔梁同步施工过程中的关键技术问题进行了研究分析， 主要内容如下： （1）介绍了塔梁同步施工方法及其优缺点；确定了致使塔梁同步施工误差的 主要影响因素；针对每一主要影响因素制订了淠望路斜拉桥塔梁同步施工的控制措 施。 （2 ）结合淠望路斜拉桥工程具体情况，确定了淠望路斜拉桥的施工步骤和不同 部位的施工方案；建立了施工控制原则以及质量、进度和安全保障措施。 （3 ）采用有限元方法，建立淠望路斜拉桥有限元分析模型；基于先塔后梁施 工方法和塔梁同步施工方法，对施工过程进行数值模拟；比较了基于两种施工方法 的桥梁变形和应力情况，进一步验证了塔梁同步施工方法的可行性；并分析了偏载 对桥梁应力及变形情况的影响。 成果对类似桥梁施工具有一定参考价值。 关键词：斜拉桥；塔梁同步施工；施工控制；有限元；数值模拟 ABSTRACT PI Wang road cable-stayed bridge because construction time limits the tower and beam construction method. Combined with the actual project PI Wang road cable stayed bridge, to the other beam synchronous construction method and control technology research and discussion, the main contents are as follows: (1) Describes the tower construction method, its advantages and disadvantages; determine that Taria synchronous construction error is the main factor to influence; development of the PI Wang road tower synchronous control measures for the construction for each main influencing factor. (2) Combinations with the road cable stayed bridge engineering concrete circumstance, identifies the point road cable stayed bridge construction steps and different parts of the construction scheme; construction control principle and the establishment of quality, schedule and safety measures. (3) Using the finite element method, establish the PI Wang road cable stayed bridge finite element analysis model; based on the first beam construction method of tower and tower and beam construction method, the construction process simulation; comparison based on two kinds of construction methods of bridge deformation and stress conditions, further verifies the tower and