外文翻译基于sopc的网络化数据采集系统设计与实现.docxVIP

西 南 交 通 大 学本科毕业设计（外文翻译）基于sopc的网络化数据采集系统设计与实现年 级: 2010级学 号: 名: 端木永敏专 业: 电子信息工程指导老师: 张 怡2014年6月LightWeight IP (lwIP) Application ExamplesAuthor: Siva VelusamyXAPP1026 (v2.0) June 15, 2009SummaryLightweight IP (lwIP) is an open source TCP/IP networking stack for embedded systems. Xilinx Embedded Development Kit (EDK) provides lwIP software customized to run on Xilinx Embedded systems containing either a PowerPC?or a MicroBlaze? processor. This application note describes how to utilize the lwIP library to add networking capability to an embedded system.In particular, lwIP is utilized to develop the following applications: echo server, web server, TFTP server and receive and transmit throughput tests.Included SystemsIncluded with this application note are reference systems for the Xilinx ML505, ML507 and Spartan?-3AN FPGA Starter Kit boards/webreg/clickthrough.do?cid=107743.ziHardware and Software RequirementsThe hardware and software requirements are:? One of Xilinx ML505, ML507or Spartan-3AN Starter Development Board? Xilinx Platform USB Cable or Parallel IV Cable? RS232 Cable? A crossover ethernet cable connecting the board to a Windows or Linux host.? Serial Communications Utility Program,such as HyperTerminal? Xilinx Platform Studio 11.1i and ISE? 11.1 for making hardware modifications ? Xilinx SDK 11.1 for running or making modifications to the softwareIntroductionlwIP is an open source networking stack designed for embedded systems. The objective of this application note is to describe how to use lwIP shipped along with the Xilinx EDK to add networking capability to an embedded system. In particular, this application note describes how applications such as an echo server or a web server can be written using lwIP.Reference System SpecificsThe reference design for this application note is structured in the following way. In each of these folders, the hw subdirectory contains the XPS hardware design, and the sw subdirectory contains the appl