LED应用注意事项收集(国外英语资料).docVIP

LED应用注意事项收集(国外英语资料) LED application considerations are two The profile LED devices in product application, electrostatic protection, LED the molding, installation, welding, cleaning and other LED due to its characteristics influence is a big factor, are related briefly. 1. The anti-static For electronic components (including INGaN blue, green, white LED) is a very sensitive to electrostatic, necessary to avoid electrostatic, trying to eliminate all possible static power. Eliminate static electricity, try to accelerate the leakage of charge and prevent the amount of static charge. ?? Use of environmental antistatic measures ?? Laying antistatic flooring and ground dissipation system, surface resistivity: 10, 6 ~ 10, 9 / cm2? The electrostatic sensitive device should be operated on the anti-static platform, and the anti-static work surface should be laid with the protective face of electrostatic dissipation material, grounding: Surface resistivity: 10, 6 ~ 10, 9 / cm2 Body resistivity: 10, 3 ~ 10, 8 / cm2 Friction electric potential: less than or equal to 100V Electrostatic voltage attenuation time: less than 0.5 S ?? Electrostatic sensitive device of the whole operation process of using, should start the once-through ion fan, and effective role in ion fan (generally no more than 60 cm) within the scope of operation. ?? The relative humidity control of static protection area is over 50%, preferably between 70% and 80%. ?? Should have good anti-static grounding system, to the ground, metope, workbench, equipment, instruments and wristbands, according to the working area and unit, isolated, and consequently into the ground, again into the bus into the ground. ?? Antistatic appliances should be used in electrostatic reserves: ?? The various container of electrostatic protection area, fixture, countertops and MATS and other should avoid to use static electricity generating equipment materials, mainly refers to the type of material products and rubber products. ?? The sold