Lcd1602 STM32 驱动 基于3.5固件(国外英语资料).docVIP

Lcd1602 STM32 驱动 基于3.5固件(国外英语资料) / * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * The LCD1602 module STM32 universal driver Different pin definitions, only need to modify the port definition section Integrated 1602 display variable functions By bushiniu 2012.12 QQ: 120954178 changsha aoxen * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * / / * * * * * * * * * * * * * * * * * * * * * * use * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * The main program calls: # include lcd1602.h / / contains the LCD driver header file Lcd_Init (); / / LCD initialization The function is shown in the header file * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * / # include Lcd1602. H # include SysTick. H / * * * * * * * * * * * * * * * * * * * * the port definitions are * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * / # define GPIO_EN GPIOC / / enable port groups # define GPIO_EN_PIN GPIO_Pin_7 / / make the ability port number # define RCC_GPIO_EN RCC_APB2Periph_GPIOC / / enable the clock group # define GPIO_RW GPIOC / / read/write select port group # define GPIO_RW_PIN GPIO_Pin_6 / read/write select port number # define RCC_GPIO_RW RCC_APB2Periph_GPIOC / / read/write the clock group # define GPIO_RS GPIOB / / data/command port group # define GPIO_RS_PIN GPIO_Pin_5 / / data/command port number # define rcc_gpio_rcc_apb2periph_gpiob / / data/command clock group # define GPIO_DATA_0 GPIOB / / data line 0_ port group The # define GPIO_DATA_0_PIN GPIO_Pin_8 / / data line 0_ port number # define GPIO_DATA_1 GPIOB / / data line 1_ port group The # define GPIO_DATA_1_PIN GPIO_Pin_9 / / data line 1_port number # define GPIO_DATA_2 GPIOB / / data line 2_ port group # define GPIO_DATA_2_PIN gpio_10 / / data line 2_ port