截止阀(外国英语资料).docVIP

截止阀 1., according to the direction of the cut-off valve, divided into: 1) straight through type stop valve 2) DC type valve: in the DC type or Y type valve, the valve body and the main channel flow into a slash, so the damage flow state is smaller than the conventional cut-off valve, so the pressure losses through the valve accordingly smaller. 3) angle stop valve: in the angle stop valve, the fluid needs to be changed only once so that the pressure drop through this valve is smaller than the conventional shut-off valve. American Standard bellows valve type zdaj41w 4) plunger type stop valve: this form of stop valve is a variant of a conventional shut-off valve. In this valve, the disc and valve seat are usually designed on the basis of the plunger principle. The disc is polished into a plug and is connected to the valve stem. The seal is made of two elastic sealing rings attached to the plunger. The two elastic seals are separated by a collar and secured to the sealing ring around the plunger by the load exerted by the valve cover nut on the valve cover. Elastic ring can be replaced, you can use a variety of materials, the valve is mainly used for open or off, but with a special form of plunger or special ring can also be used to adjust flow. 2., according to the cut-off valve stem thread position can be divided: 1) the threaded stem valve: the stem valve thread is outside the valve body. The utility model has the advantages that the valve stem is not eroded by the medium and is easy to lubricate, and the structure is more common. 2) screw stem valve: stop valve, stem thread in the valve body. This structure has direct contact with the stem thread and is vulnerable to erosion and lubrication. This structure is used for small caliber and low temperature places. 3. classification by use: Fluorine valve for various concentrations in -50 ~ 150 DEG C, the aqua flow acid, hydrochloric acid and hydrofluoric acid and various organic acid, strong acid, strong oxidizing age