CAD图纸规范(国外英文资料).docVIP

CAD图纸规范(国外英文资料) CAD drawings, specifications, design, 2009-03-09, 22:30:18, reading 658 reviews, 0: large, medium and small subscriptions Catalog I. General Provisions 1, work objective 2, work scope 3, work style Two, drawing 1, drawing specifications 2, drawings directory 3, drawings depth 4, drawings, fonts 5, drawings, revision and revision signs 7, drawings format 8, layer and document interchange format 9, additional instructions I. General Provisions Work objective 1.1 standardization - to effectively improve the quality of architectural design; 1.2 standardization - to improve the efficiency of architectural design; 1.3, network - to facilitate the standardization of network management and results sharing. Working range This standard is the unified rule of building CAD drawing. It is suitable for CAD drawing and software development in the relevant fields of building construction and construction engineering in our institute. Work style This standard for the formation of Design Institute graphic expression of the unity of style, do not advocate personal graphics expression style. Architectural drawing The expression should be clear, complete and unified. Two, drawing 1. Drawing specifications Engineering drawings are strictly in line with the state regulations on construction drawing specifications and require the consistent presentation of all aspects of the drawings. 2. Drawings catalogue Each professional drawing catalogue shall be compiled in the following order: Architecture: architectural design; interior decoration table; building construction schedule; building location graph; planar graph; elevation; profile; stairs; plane; construction details; windows; doors and windows map. Professional structure: structural design; pile foundation; bitmap; detail; structure of basement; (Civil drawings); structural details of the basement floor structure; layout; floor reinforcement; beams and columns, board, stair detail; structure detail. Electrical Specialty: