CAD基础资料(国外英文资料).docVIP

CAD基础资料(国外英文资料) 1, according to the construction drawing budget preparation; 2. Arrange materials, arrange equipment orders and process non-standard parts during construction; 3 、 according to construction drawings for construction and installation; 4, according to the construction drawings acceptance engineering. Basic requirements for drawing drawings 1, the content must not exceed 70% of the figure 2 and 0-3# drawings allow lengthening of 1/8 with long steps 3, a professional drawing does not allow more than two kinds of drawings According to the requirements of the tender to participate in the tender - winning bid - accept the design task - signing the design contract - clear the design period - make progress plans 1, the design of the program 2, preliminary design after the program is determined 3, approval of construction drawings stage 4, the construction side (supervision) 5, acceptance cover Catalog Design specification Chart The total level of Total top Plane of separation Top face facade Sample, node Cover: engineering name, design unit name, design stage, design certificate number, design date, design unit chapter Contents: serial number, drawing name, drawing number, map range, date of preparation, stamp and counter sign (Floor, Plan, plane, Ceiling, Plan, top, Elevation, elevation, Section section, Detail detail) Design notes: 1. General situation of the project Name, site and construction unit of the project The original situation, the construction area, the design scope and the design purpose of the project Analysis of existing problems in Engineering 2, design basis Current national norms Document number approved by the state or region It should be emphasized that the decoration design is in compliance with fire protection and environmental protection 3. Design instructions Changes in the structure of the original structure, such as structure and equipment; The level of decoration, fire prevention grade, fire prevention zone, sound, light, electric