ti-5al-10cr 与ti-5al-15mo 合金茁晶粒长大动力学研究.pdf

下半月出版 Material Heat Treatment 材料热处理技术 Ti-5Al-10Cr 与Ti-5Al-15Mo 合金 晶粒 长大动力学研究 李倩1 1 2 2 , 王敏 , 赵永庆 , 葛鹏 (1. 西北工业大学 材料学院, 陕西 西安 710072; 2. 西北有色金属研究院钛合金研究所, 陕西 西安 710016) 摘 要 利用Burke 提出的 力学模型研究了Ti-5Al-10Cr 与Ti-5Al-15Mo 合金在单相区不同温度尧不同保温时间 下 晶粒的长大行为遥 结果表明院在单相区袁这两种新型 钛合金中的 晶粒均随温度的升高和保温时间的延长而 长大袁且 似符合指数关系遥 同时袁计算出两种合金在不同热处理条件下的长大指数与长大激活能遥 关键词 钛合金曰热处理曰 晶粒生长 中图分类号 TG 146.2+3 文献标识码 A 文章编号 Study on Kinetic of -Grain Growth in Ti-5Al-10Cr and Ti-5Al-15Mo Alloy 1 1 2 2 LI Qian , WANG Min , ZHAO Yongqing , GE Peng ( 1. Departme nt of Mate rials, Northweste rn Polytechnical Unive rs ity, Xian 7 10072, China; 2. Northwest Ins titute for Nonfe rrous Me tal Research, X ian 710016, China) Abstract 院The -grain growth behavior of the Ti-5Al-10Cr and Ti-5Al-15Mo alloy isothermally annealed at different temperature and soaking time were investigated by means of simplified kinetic model developed by Burke. The results show that the -grain size of the two alloys increases with the increase of temperature and time, and the curves of the -grain growth approximatively obey the exponent function. Then the grain growth exponent (n) and grain growth activation energy (Q) have been calculated obtaining different values depending on the heat treatment tests. Key words 院near titanium alloy; heat-treatment; -grain growth 钛合金由于具有比强度高尧 淬透性好尧热