铸造凝固组织模拟的图形显示策略研究.pdf

9 Vol. 9 No. 0 0 1 6 MATERIALS SCIENCE TECHNOLOGY Jun. 001 许庆彦, 周 进, 柳百成 ( 清华大学 机械工程系, 北京 100084) : Cellular Automaton Al- 7% Si , , . , , , , . : ; ; Cellular Automaton ; : TB30; TG11 :A : 1005-0 99( 001) 0 -0157-05 Image displaying technique of modeling results for the prediction of cast grain structures XU Qing-yan, ZHOU Jin, LIU Ba-i cheng ( Dept. of Mechanical Engineering, Tsinghua University, Beijing 100084, China) Abstract : More and more attentions are paid to the microstructure simulation of casting alloys, which can not only predict the microstructure of castings but also provide the latent releasing information for macro-modeling of heat transfer. The modeling of microstructure of Al- 7%Si alloy was carried out by the cellular automaton method, by which a set of numerical matrices can be obtained. The extracting method for grain boundary from numerical infor- mation has been presented and used to show the grain mapping on the computer. The modeling results can be de- scribed graphically by two techniques, i. e. color displaying and black white displaying. In addition, many other functions have also been developed in the post-process program, such as zooming in/ out and pictures edition and the calculation of grain size. Modeling pictures can be comparedwith the metallographic pictures of real castings to vali- date the calculation accuracy. Key words: solidified microstructure; microstructure modeling; Cellular Automaton; image displaying technique [ 1] . ( 0. 1 Lm~ 0. 1 mm) , .