漏斗形薄板坯结晶器内铸坯传热分析analysis of heat transfer in thin .pdf

漏斗形薄板坯结晶器内铸坯传热分析 1 2 1 1 1 1 胡 硕 ， 王朋飞 ， 朱立光 ， 刘增勋 ， 李 萌 ， 肖鹏程 （1. 华北理工大学冶金与能源学院，河北省高品质钢连铸工程技术研究中心，河北 唐山 063009 ； 2. 河北钢铁集团唐钢不锈钢公司，河北 唐山 063105） 摘 要：为了更好地研究FTSC 结晶器内铸坯的凝固过程，基于节点温度传递方法建立薄板坯结晶器内铸坯三维 瞬态传热数值模型，采用有限元软件ANSYS 模拟结晶器内铸坯三维稳态温度场。对比分析平板形及漏斗形结晶 器内铸坯传热规律，探讨了漏斗区传热特点。结果表明，漏斗区内钢水存储空间增大，总热容量增加，漏斗区铸坯 宽面表面中心温度升高，坯壳厚度减薄。FTSC 结晶器宽面出口温度、坯壳厚度连续变化，与漏斗形布置一致。 关键词：结晶器；三维传热；漏斗区；节点温度传递法 文献标志码：A 文章编号：0449-749X （2017 ）02-0033-05 Analysis of heat transfer in thin slab funnel shape mold 1 2 1 1 HU Shuo ，WANG Peng-fei ， ZHU Li-guang ， LIU Zeng-xun ， LI Meng1 ，XIAO Peng-cheng1 （1. College of Metallurgy and Energy，North China University of Science and Technology ，Hebei Province High Quality Steel Continuous Casting Engineering Technology Research Center，Tangshan 063009，Hebei ，China ； 2. Stainless Steel Company of Tangsteel，Hebei Iron and Steel Group ，Tangshan 063105，Hebei ，China） Abstract ：In order to better investigate the slab solidification process in FTSC mold ，a 3D transient heat conduction model of thin slab within the funnel-shaped mold was established by the thought of node temperature transfer layer by layer. Through the analysis of ANSYS finite element software，the distribution of the 3D steady-state temperature field in mold was obtained. The heat transfer of mold with parallel plate and funnel-shaped plate was compared. Main results show that the funnel area expanded the storage space of molten steel in the mold，thus ，the total heat capacity increased. The temperature at the center of wide surface of funnel slab increased and the shell thickness reduced. The temperature and shell thic