反向路由注入.docxVIP

RRI要求：GW1和GW2上不可以配置任何静态路由，使用RRI自动产生静态路由Inside.1和Inside.2分别属于两个内网的路由器，分别于两个GW1和GW2运行ospf，GW1和GW2使用VPN使得1.1.1.0和2.2.2.0可以进行通信第一步：基础配置（包括直连接口，两个内网的ospf等等）?这里我不做过多的说明了?很简单就把show?run放上?说明下version全是12.4的RRI的配置和12.2有点小不一样Inside.1#show?run?interface?Serial1/1?ip?address?1.1.1.1?255.255.255.0?serial?restart-delay?0router?ospf?12?router-id?1.1.1.1?log-adjacency-changes?network?1.1.1.1?0.0.0.0?area?0GW1#show?run?interface?Serial1/0?ip?address?1.1.1.10?255.255.255.0?serial?restart-delay?0interface?Serial1/1?ip?address?202.100.1.1?255.255.255.0?serial?restart-delay?0router?ospf?12?router-id?2.2.2.2?log-adj