adsl灯亮故障(国外英文资料).docVIP

adsl灯亮故障 This phenomenon is produced in three aspects: A: Operator (fault transmission and switching network): the responsibility of the operator must ensure that the quality of the user (signal bandwidth, SNR, BER, transmission rate, signal level, input and output impedance, signal stability, stability of input output impedance) comply with the national standard); specific telephone: Telecommunications 10000 10060 10050 China Netcom Two: website problems: 1: the web server is unstable; 2: the software of the website is unsteady; 3: site operation and maintenance of the quality level is low; not timely troubleshooting; for example, other website is very good, a website is especially poor, this is the site of their own problems, have no relationship with the operators and users. * copyright Disclaimer: this answer is harmonious and original, no person shall embezzle!. Three: the user (responsibility) of the following factors will lead you to the current state, if the detection of these operators is no problem, then, is your users own problems; if you dont have the following questions, you can call the telephone operator directly, allow operators to give you their business operation related matters. * copyright Disclaimer: this answer is harmonious and original, no person shall embezzle!. The reasons for this phenomenon and how to deal with it Under the premise that the users device settings must be correct: 1: power supply 1.1 check the power supply with a multimeter 1.2 is the AC voltage fluctuation within allowable range? Does it exceed 5% of the rated voltage? Is the ripple factor (checked with a voltmeter) qualified for the 1.3A/D converter? 1.4 is the temperature rise of the power supply abnormal? Does the 1.5 voltage regulation conform to the technical specifications? 1.6 under the 1.5 rated load, the voltage regulation characteristics and the ripple factor are in line with the technical specifications? 1.7 when replacing the big fan, do you have the power capa