dmx 512(国外英文资料).docVIP

dmx 512 Explain 1, 192DMX CHANNEL. 2, there are 30 BANKS, each BANK has 8 programmable SCENES. 3 、 there are 8 adjustable potentiometers to adjust the output size. 4, built-in MIC head, provide sound trigger. 5, in the automatic trigger state, through the TAP SYNC key or SPEED potentiometer to determine the automatic trigger time. 6 、 with MIDI interface, it can be controlled by MIDI signal at any time. 7, 4 digital display. 8, the first digital tube display CHASES, second bit digital tube display SCENES. 9, third, fourth digital display, BANKS. 10, second, third, fourth digital display steps or 0-225 or TIME. 11, the BLACKOUT function can be used manually or MIDI for remote control. 12, CHASES programming and CHASES motor function, can be used manually or using MIDI remote control. 13 、 output delay function, adjust delay time with FADE TIME potentiometer. 14, DMX output polarity selection. Parameter 1 、 supply voltage: DC 9V-12V 2 、 supply current: no less than 300mA 3 size: 482 * 132 * 73mm 4, weight: 2.5kg Operation instructions 1 Introduction Each SCENE has 192 DMX channels that regulate the output of each channel (adjusted by the channel key and the adjustable potentiometer) II. Each BANK can be programmed with 8 SCENES, and when SCENE is running, it is a BANK in which each successive operation of the SCENE has been programmed, again and again. III, with up or down arrow keys to select BANK, also can through the MIDI interface, MIDI interface, using MIDI signal, 30 BANKS. Only one BANK can be selected at a time. IV, SCENES can automatically run, running time, determined by the TAP SYNC/DISPLAY key, can trigger the SCENES operation by voice, can also be triggered by NOTE ON signal MIDI SCENES run directly, or press a SCENE to manually trigger SCENES. V, each CHASE programmable 240 SCENES, a total of 6 CHASES, can choose CHASES operation, can choose one or more, also can through the MIDI remote control signal. Two, control 1.SCANNERS DMX channel buttons are show