港口工程碳纤维加固定额消耗研究-中国港湾建设.PDF

36 卷 4 期 国港湾建设 Vol. 36 No.4 2016 年4 月 China Harbour Engineering Apr. 2016 港口工程碳纤维加固定额消耗研究 虞莹 （中交 三航务工程局有限公司，上海 200032 ） 要：通过单项碳纤维加固工程的统计，得出其综合人工、材料及机械消耗，然后选取典型地区多项工程，应用 最小二乘法进行优化拟合，减小了小样本数据的局限性，并得出港口工程碳纤维加固的定额消耗。最后通过与相关 定额的规定进行对比，验证了研究结果的合理性，并指出了港口工程碳纤维加固的特殊性。研究成果可为相关单位 成本预测、工程招投标及预决算 提供理论指导与技术借鉴。 关键词：碳纤维加固；定额消耗；最小二乘法 中图分类号：U654 文献标志码：A 文章编号：2095-7874（2016）04-0016-04 doi ：10.7640/zggwj s201604005 Quota consumption of carbon fiber reinforcement in harbor engineering YU Ying （CCCC Third Harbor Engineering Co., Ltd., Shanghai 200032, China ） Abstract The consumption of labors, material and equipment were obtained respectively after the statistical analysis of a single proj ect of carbon fiber reinforcement. The least square method was adopted to decrease the limitations of a single proj ect, and the quota consumption of carbon fiber reinforcement in harbor engineering was revealed after the optimum fitting of several proj ects. Through the comparison with the regulation of current relative quota, the validity of this research was approved and the characteristic of harbor engineering was found. The results should serve as the theoretical guide and technical reference for relative units to do cost estimation, bidding and budget etc. Key words carbon fiber reinforcement; quota consumption; the least square method 0 引言 极意义。 20 世纪初以来，由于碳纤维具有高强度、高 从定额相关理论出发，介绍了定额组成、核 ， 、 模量及施工便捷 突出优点 陆续得以在房建 算方法及最小二乘法。通过单项碳纤维加固工程 抗震及港口加固工程