基于实验Inconel718正交切削有限元仿真分析.pdfVIP

翩造业信息化 1 基于实验Inconel78正交切削有限元仿真分析 许小进，李颖。叶琛 (国核电站运行服务技术有限公司，上海200233) 摘 要：为研究裂削效应和前7]面粘压对Inconel718切削过程的影响．基于正交切削实验建立lnconel718有限元切 削模型，模型结果同实验值对比以验证模型可靠性。通过改变刀具圆角半径和负前角参数．提取并比较不同的切削力时 域曲线和刀具温度，分析犁削效应和前刀面粘压。研究表明犁削效应提高进给力数值，刀具圆角半径由O变为5“m． 削加工不稳定。 关键词：Incone}718犁削效应：有限元仿真 501 中图分类号：TG 文献标志码：A 文章编号：1。。2—2333(2014)05—0124—03 SimulationofInconel718 ProcessBasedon Analysis OrthogonalCutting Experiment XU LI YEChen Xiaojin，Ying， (SlateNuclearPowerPlanlServjce 200233，China) Company，Shanghai Abstract：To theeffectsof andrackfaceextllJsiononInconel718 inVestigate ploughphenomenon machiningprocess，a FEmodelisestablished．A underthesame condi“ons intheFEmodel cuttingexperiment cutting adopted isconducted usedinFEmodel todeferminethe andtoconfirmthemodel．The andrackface parameters ploughphenomenon exlrusionarestudied the radiusand rake fbrceand bychangingcuttingedge negaliveangle．】Ⅵeanwhile，thecutting tool dataare basedonthesimulationresults．The temperaturecompared simulationreVealsthatthe eff色ctleads plough toincreasefeedforcewhichis 15％withfhe radjus from0to resultsalso improvedby cuttingedge changed 5斗m．The leadstoincreasethe showthatrackfaceextrusion fbrceand is fbr cutting chip