HP ProLiant 服务器常见50 问题总结（国外英文资料）.docVIP

HP ProLiant 服务器常见50 问题总结 HP ProLiant server common 50 questions summary I have a PCI 32 bit /33MHz 5V card that can be plugged into the ML110G4 server? PCI 32 bit /33MHz 5V card is not used in the ML110G4 above, because ML110G4 above is two PCI 32 bit /33MHz 3.3V PCI slot, their voltage is different, is not able to mix inserted. How is the ML150G3 model configured with RAID5? If you want to configure the ML150G3 server array 5, need to add numbers for E200 array with 128MB BBWC cache 411508-B21 card, also need the number 438160-B21 HP SAS/SATA in 1to4 in Cable, used to connect the disk array card and cage. How does ML150G3 install the WINDOWS2003 operating system when RAID1+0 is configured with four hard disks? When installing an operating system in an array configuration, ML150G3 first opens the array option in RBSU, and then presses the F8 key to configure the array when the array card is detected after boot. After you configure the finished array, you need to add the array card driver to the installation of the operating system, and then complete the installation. What memory does ML150G3 use? What should I pay attention to when upgrading memory? ML150G3 is used in PC2-5300 buffer memory, the total buffer memory, so the memory upgrade, not in accordance with the previous server according to the number of pairs added along, need to be added in accordance with the order of pairs marked out on the cover of the chassis. Does DL140G3 need to add drivers when installing the Linux operating system? The DL140G3 server SATA models can be directly installed operating system when not using array installed Linux operating system used in SAS/SATA, when the array models using the installation, you need to add array driver can install the operating system. What are the new features of the processor and memory used by the latest DL140G3? DL140G3 is the latest generation of HP server, he uses the latest E5300 Inter quad core processor, and 5100, 5000 dual core processor series. T