《电力牵引控制系统》课程复习题（国外英文资料）.docVIP

《电力牵引控制系统》课程复习题 Review of the course of electric traction control system For the first time Fill in the blanks: 1, electric locomotive electrical circuit according to its different function, can be divided into the main circuit, control circuit and auxiliary circuit three parts. The power supply mode of main circuit of 2 and 6G type electric locomotive adopts centralized power supply mode of bogie. 3 、 the single phase power line rectifier is adopted in AC transmission line locomotives in our country. 4. In order to improve the power factor of locomotive, the multi stage bridge sequence control method is adopted in the main rectifier bridge structure. 5, Holzer sensor is the use of semiconductor components in the electromagnetic effect (Holzer effect) and made. Two, individual choice questions: 1, 95., in order to prevent misoperation, the driver controller is provided between the two handles (A). A. mechanical interlocking, B. positioning device, C. electrical interlocking, D. clamping mechanism 2, SS3B locomotive two side AC short circuit, silicon components road breakdown, rectifier output short circuit are protected by electronic cabinet protection plug and 3 ~ 6LH current transformer composed of devices, its setting value is (C). A.800A + 2%, B.1500A + 2%, C.3000A + 2%, D.400A + 5% 3, when the contact loss time is greater than (A), zero pressure protection action, so that the main break split gate. A., 0.5S, B., 1S, C., 1.5S, D.3S The signals of the traction ammeter of the 4 and SS3B locomotives are obtained by means of (C). A. current transformer, 3LH, B. current transformer, 3 ~ 6LH C. current sensor 1~6ZH, D. 1, 2ZYH The main rectifier bridge of type 5 and SS4 locomotive can be divided into three sections, not equal half control bridge, and the rated voltage of each section of bridge is V (A). A, 335 B, 535.5 C, 670 D, 1071 Three 、 judgment questions The 1 and SS4 type locomotives are eight axle locomotives, consisting of two sections, each with the same ele