八重洲VX-6R简易使用说明（国外英文资料）.docVIP

八重洲VX-6R简易使用说明 VX6R simple instructions (turn) to the need to see see ~ hehe Easy to use instructions Part of the button function Brief After the F/W is pressed briefly, the F icon appears at the bottom left of the screen. It disappears after 2-3 seconds and presses other keys during that time. It is used to enable other buttons to perform second functions. Press for more than 1 seconds, the lower left F icon and the screen above the channel number are flashing, you can channel storage operations. The BAND is pressed briefly in the VFO state to select the band, and the frequency of the last use of the band will be automatically remembered. Continue pressing for more than 1 seconds and start the VFO scan action. MODE short press is used to change the receive mode and select the proper receive mode between AUTO/WFM/AM/FM. Press F/W and press 0/SET to enter the settings menu. V/M switching VFO and channel storage mode Memory storage: 1. in VFO mode select the required frequency, if you need to store, such as CTCSS or DCS, transmit power, transceiver frequency difference, etc., can also be set at this time. 2. press the F/W button for one second 3. release the F/W key, within five seconds, rotate the DIAL knob to select the memory channel you need (press the P/DMR button to select hundreds of channel numbers). At this point, if the channel number flashes, the channel you are currently selected is free and not stored. 4. press the F/W key and the frequency will be stored. 5. at this point, the VX-6R remains in VFO mode, enters new frequency and saves it, simply repeating the above operation. The general microprocessor will automatically select the next UN stored channel. Store independent transmit and receive frequency: 1. first select a frequency to be stored as the receive frequency (for example, storing the 145.325MHz in the 101 channel). 2. and then select a frequency as the transmit frequency (for example, 438.325MHz). 3. press the F/W button for one second. 4. rele