北漂族的租房实用功略（国外英文资料）.docVIP

北漂族的租房实用功略 Application of high speed arc spraying to repair of ship stern shaft Zhao Hui, Ceng Zhilong Abstract: a push wheel worn around the propeller shaft neck repair as an example, introduces the relevant technical problems by using thermal spray technology to repair the tail shaft coating preparation method and coating materials, coating thickness, the main process of thermal spraying and coating processing etc.. This method has the advantages of reliability, speed and economy. It can be used as a reference for the maintenance personnel of ship shaft and shaft parts. Key words: thermal spraying; high speed arc spraying; ship stern shaft; repair; coating design CLC number: U664.21, document identification code: A, article number: 1671-7953 (2009) 03-0064-04 Application, of, High, Velocity, Arc, Spraying In, Repairing, of, Marine, Tail, shafts ZHAO Hui ZENG Zhi-long (College, of, Energy Power, Engineering, WUT, Wuhan, 430063) Abstract: With an example of repairing of the worn left and right tail shafts of a vessel, the choice of coating fabrication methods and coating materials, main thermal spraying processes and coating machining were introduced in this paper. This technique possesses the advantages of reliability, short repair period and low cost. This provides reference for persons in charge of repairing marine tail shaft and other shaft components. Key works: thermal spraying; high velocity arc spraying; marine tail shafts; repairing; coating design The stern shaft of ship is an important part of ship shaft system. Its working condition is directly related to the safety of ships running. When the stern shaft is seriously damaged, corroded and scratched, it must be repaired. The check must be stern in the dock (or ship), repair of long period, high cost, often affect the whole ship repair period, so how to fast, reliable and economical for the repair of the tail shaft wear has been valued by [1] for ship repair enterprises. A push for the two round of the Ya