迪普马电磁阀DSC3系列（国外英文资料）.docVIP

迪普马电磁阀DSC3系列 Dipuma relief valve, DS3-S2/10N-A110K1 Sales agent Dipuma solenoid valve, proportional valve, relief valve, servo valve, gear pump, servo cylinder, Superposition valve, sequence valve etc. most of the spot Shanghai Xinyu Electrical Equipment Co., Ltd. Contact person: Chen Fei (Sales) Tel: 021 Fax: 021Online QQ:1536539934 1277069118 URL: Mail: 1536539934@ Mobile:DSC3 hydraulic RECTIONAL control valve series 10 1.-DSC* hydraulic operation direction control Valves can be made with 3 or 4 of several methods Valve core interchangeable and mounting interface According to ISO4401 (CETOP, RP121H) standard. - the valve body is made of high strength cast iron In order to provide extensive internal access The flow pressure drop is minimized. - this is the position of the spring with 2 or 3 back loops, or Machinery reserved for two positions. 2.- hydraulic oil Use mineral oil based hydraulic oil HL or HM, according to ISO6743-4. For these liquids, use NBR seals (code N). Fluid type HFDR (phosphoric acid grease) should be sealed using FPM (code V). For the use of other fluid types such as HFA, HFB, HFC, please consult our technical department. Use liquid temperature above At 80 degrees C, the resulting fluid and seal degradation will be faster. The fluid must retain its physical and chemical properties Characteristic。 The 3.- curve defines the work flow according to different versions of the valve pressure. Values represented on a graph. Standard solenoid valve. 4 check valve, if the use of 3 way valve and port A O operating restrictions, can be greatly reduced B has been obtained by blocking or not flow.The values, according to the ISO6403 specifications, with mineral oils of viscosity of 36 cSt, at 50 degrees C and filtration According to the ISO4406:1999 class 18/16/13. 4.- installation Centering and return spring configurations can be mounted in any position; type of RK valve - No spring and mechanical brake - must be fitted wit