FANUC16180i通用故障分析(外国英文资料).docVIP

FANUC16180i通用故障分析 Two 、 FANUC16/18/0i general fault analysis The display screen is displayed on the absolute position of alarm 300 kushibiki encoder memory has been lost, need to return to the reference point 1) return function if there is a point of reference, the manual return reference point method is as follows: A, B, the other to lift the alarm, PRM1815#5. C, return the reference point manually, D, and press the complex E and bit. (2) if there is no reference point return function, then press the machine tool against the mark at the mark of each axis of the machine. (3) if you change the