国际学术英语PPT概要1.pptVIP

Simulated International Conference on Metallurgical Science and Engineering Preparation of Cementing Materials Using the Lime Neutralization Sludge LeiJie （雷杰） 123501040 Class D10 School of Metallurgical Science and Engineering Simulated International Conference on Metallurgical Science and Engineering Contents Materials and Methods 2 3 4 Conclusions 3 Results and Discussion 1 Introduction Preparation of cementing materials using the lime neutralization sludge Two hundred million tons of smelting slag was produced by metallurgical industry, 7 billion tons of smelting slag was banked up until now. 4th Pb Cd Zn Zn Cd Pb Cd Cd Pb Zn Zn Cd Pb soil groundwater harm Lands occupied Introduction Introduction CaSO4 Me Me Me Me Me Me Me Me Me Me Extractingmetals gypsum slag Me Lime Neutralization Sludge (LNS[碱中和渣]) + Building materials A bit of metals were recycled and high energy-consuming and high cost. Low cost and energy-consuming. Key problem is leaching toxicity[浸出毒性] To be stated × Materials and Methods Materials Lime neutralization sludge (LNS), fly ash, carbide slag , 425R ordinary Portland cement and ISO standard sands. Experimental Procedure LNS Fly ash Cement Carbide slag Dry-type mixing Wet-type mixing Ball-milling mixing Sands Water Injection molding and curing Cementing materials Compression strength test Leaching toxicity test Analysis The composition of waste sludge: Resolution method, ICP-AES, XRD. Compression strength test: Universal hydraulic testing machine (WE-300A). Leaching toxicity test: Solid waste-extraction procedure for leaching toxicity-Sulphuric acid nitric acid method (HJ/T299-2007). Materials and Methods Results and Discussion Properties of lime neutralization sludge Tab.1. Chemical compositions of LNS Fig.1. XRD pattern of LNS Main components：Dihydrate calcium sulphate (CaSO4·2H2O), calcium sulfate hemihydrate (CaSO4·1/2H2O) and a few ferric hydroxide (Fe(OH)3). Tab.2. Leaching toxicity of original LNS The leaching toxic