低压隔离开关(国外英文资料).docVIP

低压隔离开关 This article is contributed by zhangzhaojing7 DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Low voltage isolating appliance Use 1. knife switch and classification of electrical equipment maintenance, to cut off the power supply, the maintenance and the live part of detachment, and keep the isolation distance effectively, need to be subjected to over voltage level voltage in the fracture. A knife switch is a switching device that serves as an isolating power source. The knife switch of isolating power supply is also called isolating switch. Isolated knife switches are generally no-load on-off devices. They can only be switched on or off negligible current (refer to the capacitive current or voltage transformer current of the bus, short cable, or voltage transformer). Some knife switches have the ability of breaking and closing. When their breaking capacity meets the required current, they can be switched on or broken off under the condition of no fault. The knife switch used as the isolating power supply must satisfy the isolating function, that is, the switch fracture is obvious and the fracture distance is qualified. Knife switch and fuse combination into a unit called the knife switch with fuse knife switch; movable part (moving contact) by the fuse holder fuse with body composition, called fuse knife switch. A knife switch fuse assembly is provided with auxiliary elements, such as an operation lever, a spring, an arc cutter, etc., and can be assembled into a load switch. The load switch has the capability of switching on or breaking off the load current and certain short-circuit protection function under non fault conditions. 2. the main parameters of low voltage knife switch, the main parameters of low voltage knife switch are: rated insulation voltage, that is, the maximum rated voltage. Rated working current. Rated work system: divided into 8h work