LED测量误差探讨.pdfVIP

叶荣南：LED测量误差探讨 文章编号：1006—6268(2007)09—0021—05 LE D测量误差探讨 叶荣南 (厦门市LED促进中心，厦门361003) 摘 要：CIE 127 1997推荐A条件和B条件，并提出”平均光强”的概念．对于各实验室统一测 试条件，提高比对精度起到良好的作用。但是该规定也存在着平均光强概念不明确．发光点定 位不准确的严重缺陷。本文建议摒弃平均光强概念，认可LED为简单光学系统．并提出用光学 封装的概念代替电子封装，且LED封装要有定位要求，这样才能根本解决LED的测量误差 关键词：平均光强；立体角；光学封装：定位 中图分类号：TN958_57 文献标识码：B Discussion of LED Measuring Error YE Rong-nan (LED Promotion Centre，Xiamen 361 003，China) Abstract：CIE1 27 1 997 recommend to the measuring condition A． condition B，and the concept average lighting intensity to solve the problem of measu ring LED accuratly ． It is a standa rd of measuring condition for each laboratory and favorable in increasing the precision of measuring．The deficiency of Cl E1 27 is ambiguity of the concept average lighting intensity ，and the illegibility of the lighting point S position ， This acticle advised to abandon the concept‘average lighting intensity‘，and defined the LED as a simple optics system． It also advised to replace electronic packaging with optics packaging ． The LED should be placed in the specifically position with X，Y，Z Coordinate．We can find the ultimate way to measuring LED accurately in this article． Keyw0rdS：aVerage lighting intensity；solid angle；optics packaging；position 1 LED的测量误差和CIE127号文件 从。如何判断优劣成为业界的一大难题。随着LED的 迅猛发展，提高LED测量精度的呼声越来越强烈，因 在LED产业中，普遍存在测量误差大的问题。同