弹性力学（双语课件）弹性力学双语课件习题 2.pptVIP

2.13.1 Given the following displacement expressions;At the position of interest we then get;2.13.2 Find and from the following stress components:;By simple calculation, we get;2.13.3 A uniform thin plate with holes is subjected to a uniform pressure of intensity q on its entire boundary, including the edges of the holes. Body forces can be negligible.Show that the stress components and satisfy the differential equations of equilibrium, the compatibility equation, the boundary conditions and the condition of single-valued displacements, i.e., they are the true solution of the problem.;Solution;When we substitute the stress components into the left side of the above equation,it is zero and equal to right side,so the compatibility equation is satisfied.;So stress boundary conditions are also satisfied.;From the final equation we have;Satisfy the condition of single-valued displacements for multiply connected body.;2.13.4 Investigate whether the following components of strain are satisfied the compatibility equation?;On the other hand,substituting the third equation of Eqs(a) into the third equation of Eqs.(2.4.6),then;2.13.5 Consider the polynomial  Where are plane rectangular coordinates and A,B,C,D,E are constants. (a)Determine the conditions for which is an Airy stress function(that is,for which is biharmonic). (b)Derive formulas for the corresponding stress components.Are they compatible? ;Solution;c.Show that the stress components can satisfy compatibility Eq.(2-11.1);2.13.6 For the beam and coordinate axes shown in the figure,the stress components are given by;Solution;From the first of Eqs.(2.7.2),we get;3.7.2. The gravity wall shown in Fig.3.7.1 has a density ρand is subjected to a uniform shearing force of intensity q on the right surface.Find the stress components. ;2.Derive the solution for the stress function from assumed stress component;3.Find the stress function from the compatibility equation(2.