汽车加速操作技术（Automobile acceleration operation technology）.doc

汽车加速操作技术（Automobile acceleration operation technology） Cars drive in the process, such as the need to speed up (at the good road or overtaking), can be operated in the following two methods: one, the engine acceleration engine speed, increase the engine speed is actually used to achieve a method of auto speed. Step on the accelerator pedal, engine oil supply increase, speed up, so, speed increase. It is important to note that the foot does not shake when you step on the accelerator pedal, if the foot shakes, the fuel is uneven, the speed of the car will not rise steadily, and the car will shake violently. In addition, the speed, using the method of step on the gas in the foot to step on the accelerator pedal down smoothly, at this time, dont be quick to relax the accelerator pedal, if loosen too fast, sudden deceleration, the inertia force under the action of gravity moved forward, sharply cause cars nod phenomenon. In this way, the body of the car is prone to damage. Goods in the carriage are also vulnerable, while the car is strongly moving forward and may damage the cars parts. When the car needs to slow down, it should slow down the gas pedal slowly and make the car slow down smoothly. The gearbox changes speed of the vehicle, which has a lot of gear in the gearbox, which changes the speed of the car by matching the gear with different teeth. Gear matching by the shift lever to realize, the commonly used four speed transmission of variable pole position is: Ⅰ to Ⅳ archives, speed increased, N file for gap, R to reverse gear. Four cars speed transmission of accelerating operation main point as follows: (1) auto start shift: when the car started, hang into Ⅰ gear transmission, and then left foot gradually relax the clutch pedal, at the same time his right foot on the accelerator pedal slowly, engine speed increase, clutch into linkage, auto start walking. (2) in Ⅱ file: auto start after driving. When the speed up to 8 ~ 12 km/hour, to change into the Ⅱ block. Fir