测井解释（Logging interpretation）.docVIP

测井解释（Logging interpretation） 1. The evaluation reservoir is the basic parameter not; not; not; not; not; : porosity, permeability, saturation The H element in the common elements that make up sedimentary rocks is the best moderator of fast neutron. The effect of rocks on thermal neutrons is determined by CL in rocks The interaction between neutron and matter mainly includes elastic scattering, inelastic scattering, floating and so on. 4. The results measured by lateral and shallow lateral and lateral direction respectively reflect the original stratum, flushing belt and excessive resistivity. The greater the density of the formation, the greater the velocity of sound waves in the stratum, and the smaller the measured sound waves The main radionuclides in the rocks are U, TH and K, and the natural radioactive strength of sedimentary rocks is mainly determined by the clay content in rocks. The gamma radiation produced by radionuclides in the decay process can produce photoelectric effect, Compton effect and electron pair effect. 8 microelectrode logging is composed of micro-potentials and microgradients. The basic characteristics of the permeable layer on the microelectrode curve are RLML R2ML. According to the base gradient electrode system, the maximum value of the Ra curve can be divided into the bottom of the stratum. The relationship between oil saturation So and water saturation is So + Sw = 1. 11. Two important characteristics of the oil and gas layer must be porosity and permeability. 13. In the m-2 crossplot, the lithology of the strata is determined. 14, on the rapid visual figure, Φ not; - Φ xo said residual oil porosity, Φ xo - Φ w not; Movable oil porosity, Φ - Φ w not; Oily porosity. 15, for shale line, formation permeability of SP to the positive or negative direction to deflect, it mainly depends on the relative salinity, RW and RMF in RW RMF positive anomaly SP curve appear when, local water flooded layer within the biased big features on S