蜗杆加工（Worm processing）.docVIP

蜗杆加工（Worm processing） The 2006-12-05 【 abstract 】 using ordinary lathe, CNC lathe processing thread and worm, is the machine manufacturing industry is one kind of the most widely used in processing of security technology, the quality problem, is especially important. By analyzing the rational choice of cutting parameters and tool parameters, this section discusses the method of ordinary turning and nc turning. Keywords: thread analysis, processing method, programming. One, the introduction In all kinds of mechanical products, parts and worm applications with threads are widely used. It is commonly used to process thread and worm by turning. Other materials can also see the thread processing method, but the way this section describes the other information is different, especially when using a CNC machine tool cutting thread, a unique feature of more, practice has proved that the processing quality and production efficiency are greatly improved. Ii. Relevant knowledge 1. Selection of thread tool materials The commonly used threading tool materials include high speed steel and hard alloy. High speed steel threading tool, easy to wear sharp, and good toughness, the blade is not easy to crack, the thread surface roughness of the car is small, but high speed steel is poor heat resistance. Therefore, it is suitable for low speed threading. Hard alloy threading tool is of high hardness, good heat resistance, but poor toughness, used in high-speed threading. 2. Influence of screw Angle on working Angle of lathe tool Threading, due to the influence of the helix, cutting plane the position has changed, and the cutting tool rake Angle and back Angle at work and grinding anterior horn (static) before and after the grinding Angle (static) after different numerical. The degree of variation depends on the size of the threaded Angle of the workpiece. The Angle of spiral Angle of triangular thread is generally smaller and less influential. But in the turning of the rectangle, the tr