浅谈风力发电专用轴承.PDFVIP

風 力 發 電 專 用 軸 承 潔淨的能源是追求工業發展與保護生活環境兩者兼顧所追求的目標之一，風力發電是近世紀以來除 太陽能發電及地熱發電與潮汐發電之外的另一選項，用取之于自然的生生不息能量，轉化成可供各 種民生工業使用的電力，又能減低對環境污染的衝擊，也是目前政府所致力開發的能源。 風力發電機主要由塔架、葉片、發電機等三大部分所構成，而其內部所使用之轉動軸承亦是主要配 件，信諾工業本於多年來對於大型軸承專精的技術，結合各協力廠家之研發能量，開發製造高品質 且耐用之風力發電機專用軸承，期能對環境保護有所貢獻。 Special bearings for wind power generation Clean energy is one of the solutions when consideration must be given to both industrial development and environmental protection. By physical methods transferring the endless nature energy into electricity without impacting the environment, it is the very way that most governments commit to develop. Wind power generation is an option other than solar power, geothermal power and tidal power generation in these years. A wind power generator is composed by three major parts, Tower, Blades and Primary generator. All these major parts need various special bearings to achieve their performances. Based on our experiences of large bearings and combined RDs with our alliances, Sino Precision is developing and manufacturing high quality and durable special bearings for wind power generators. Better environment is something that we concern too. 風電軸承之種類： 風力發電機軸承通常包含偏航軸承、變槳軸承、傳動系統軸承(主軸和變速箱軸承)目前信諾工業為 客戶提供的是偏航軸承和變槳軸承，每台風力發電機用一套偏航軸承和三套變槳軸承。 1.偏航軸承安裝在塔架與座艙的連接部，一般採用四點接觸球轉盤軸承或交叉圓柱滾子轉盤軸承。 2.變槳軸承安裝在每個葉片的根部與輪轂連接部位，一般採用單排或雙排四點接觸球轉盤軸承。 Kinds of special bearings for wind power generator Usually, there are three kinds of special bearings, a yaw bearing, three pitch bearings and a set of transmission bearings (spindle and gearbox bearings) in a typical wind power generator. Sino Precision supplies yaw bearings and pitch bearings. 1. A yaw bearing is applied at the joint between the tower and the cockpit of the generator. Four contacting points slewing bearing and cylindric