仓库验收员（The warehouse receipt clerk）.docVIP

仓库验收员（The warehouse receipt clerk） Warehouse inspector Multiple choice 1. The general material shall be completed within () days, and large or special materials shall be completed within () days. A, 2, 5, B, 3, 7, C, 1, 6, D, 3, 6 2. The acceptance error of material quantity shall be measured by weight, and the error shall be allowed. The permission of length is the error of (). A, 2 ‰ 1 ‰ B, 3 ‰ 2 ‰ C, 3 ‰ 1 ‰ D, 1 ‰ 2 ‰ The special circumstances may take sampling inspection, and the sample number is generally carried out according to the amount of goods delivered. A, full inspection of 10%b, sampling 15% C, full test 15% D, sampling 10% 4. If the goods are not delivered to the warehouse, they should be listed as () A. In-transit materials B 5. The quantity of materials shall be found to be short in quantity when the goods are delivered to the goods, such as within the scope of the national regulations (). A, short B, qualified C, unqualified 6. The metering method of material distribution is consistent with the measurement method of incoming goods. A, it must be B, not C, not necessarily 7. There is a reusable material in stock, and the warehouse shall be distributed according to the principle of (). A, first use the old, then use the new B, first use the new, then use old C, old and new 8. When physical and chemical tests are required to examine physical and chemical properties of materials, they shall be tested and measured by technology. A, the department of the department of inspection B, the professional inspection department The delivery of the goods, the certificate is not complete, in principle not acceptance, should be treated as (). A. In-transit materials B 10. The emergency treatment method for sparse leakage is () A, clear B, water or sand cover C and sand The minimum temperature is called () when the flash burns. A, B, flash point 12. The burning point of paper for common items is (). A, 100 ℃, 130 ℃, 150 ℃ C B 13. When the quantity is not in conform