Simulink库（Simulink library）.docVIP

Simulink库（Simulink library） 1: Continuous: The Derivative is differentiating the input signal Integrator integral State - Space establishes a State equation Transfer function of the numerator and denominator of Transfer Fcn Transport Delay input signal Delay a fixed time in the output Variable Time/Transport Delay input signal delays a Variable Time output Zero - Pole represents the transfer function model of Zero Pole 2: Discontinuous The nonlinear segment of the gap (such as gear) Coulomb Viscous simulation has a nonlinear link with Viscous and static Friction characteristics Dead Zone sets the Dead Zone Dead Zone Dynamic setting Dynamic Dead Zone range The Hit Crossing detects the point where the signal crosses the set point, and then outputs one when traversing. The quantizer generates step output quantifiers, pulse modulators, and digital converters based on input The Rate Limiter restricts the Rate of change of input signals up and down Rate Limiter Dynamic limits the Rate of change of input signal rising and falling Relay link Relay for Relay simulation with hysteresis characteristics; Relay; Wrong accelerator; Relay; Retransmission, relay Saturation is set in the link of the positive and negative limiting values of the input signal analog Saturation characteristic, Saturation, Saturation, water Saturation Saturation Dynamic set upper and lower Saturation values of the input signal, removed limit of lower limit and upper limit take ceiling Wrap To Zero is output 0 if the input is limited 3: Discrete The Unit Delay signal is sampled and then output after a sampling period Integer Delay input signal Delay N sampling period output Tapped Delay input Delay fixed a sampling period, all of the time Delay output Discrete Time Integrator outputs a Discrete Time integral for input Discrete Transfer Fcn represents a Discrete Transfer function Discrete Filter Discrete Filter Discrete Zero - Pole Zero - Pole Discrete transfer function Difference Difference Discrete D